Basic knowledge of stamping mould

Cutting,
Cutting is using part stamping process and material or other part of the material, (or waste separation sequence) of a kind of stamping process. Cutting is cut off, and punch, blunt blunt trough, lack, cutting, cutting overhead conveyor, trimming, tongue, cut and refitting process of separation etc.

cut
Cut along is to open the contour local materials instead of a separate punching procedure. Cut apart in the materials in place before or separation of the plane.

trimming
Trimming is using the stamping forming process of trimming edge, make certain diameter, certain height or certain shapes of a kind of stamping process.

Cut the tongue,
Cut along the tongue is open outline will complete separation of local rather than a stamping process. By local separation material, it has the required position of workpiece, no longer in certain places before the plane separation conveyor parts. cut

cut
Cut along is to open the outline of separation material, a kind of stamping process workpiece materials become separated or process.

Flaring,
Belling is hollow tubular parts or open place outward expansion of a kind of stamping process.

punching
Punching is closed contour from the waste materials and processes in a trolley conveyor separate punching procedure, in material or processes in the hole to obtain.

Blunt lack
Blunt lack is open from the waste materials or procedure Outlines on the separation process, a kind of stamping forming open, the depth profile gap than width.