The joint method of Overhead conveyor

All of the Overhead conveyor must connect into the ring to practical use, so the Overhead conveyor is crucial to a joint to link. Joint direct impact on the Overhead conveyor conveyor line can use life and smooth operation.
1 and joint
Methods: the joint overhead conveyor machinery fittings, cold and hot glue joint sulfide joint wait a few commonly used methods.

Mechanical fittings are generally refers to the use of joints, the connector strap, convenient, also compare method, but the economic efficiency of the joints of low, easy damage conveyor service life of the product has certain effect. In PVC and PVG whole core conveyer, antistatic properties in the joint with the following general 8th grade products are using this method of joints.

Cold adhesive connector, also is the sticky mixture to undertake joint cold. This way of joint than machinery fittings, high efficiency, also more economic, should be able to have better effect, but from the practice of connector, due to the process conditions, another is the quality of adhesive, so is not very stable.

Thermal curing connector, proved to be the most ideal of a connector to ensure high, the joint overhead conveyor, but also very stable, joints and very long, easy life easier to handle. But the existing process trouble, high cost and joint operation time long shortcomings.

2, the joint belt

According to need to adopt mechanical fittings, cold and hot glue joint sulfide joint etc fittings. Generally cold adhesive joint, thermal curing joint is staged structure joints.

3, PVC and the core of flame retardant belt PVG connector

Due to the special structure of the core belt, joint not too easy, so most of the way by mechanical fittings, namely strap joints. 8 but above the tape, in order to guarantee the joint effect, generally or thermal curing joints. Joint structure are fingerlike joints. The flame retardant PVC and core conveyer PVG thermal curing connector technology is complex, the requirement of equipment is also high.

4, steel wire core belt joints

Wire core Overhead conveyor is all the joints of the most complex connector technology, not only the process is more complex, the design parameters of maximum size of joints and. Different levels of product chooses different structure, the joints of concrete structure, please see GB9770 standards.