Conveyor Parts operation and maintenance

conveyor parts operation:

1 before starting to check on the Conveyor Parts is will damage the obstacles. If there is, will eliminate obstructions,

2 before starting to observe whether the power supply is normal, if necessary, to ensure measurement equipment needed normal voltage,

3 if the inspection equipment of normal, can boot operation,

Conveyor maintenance:

1. Checks daily transmission motor and reducer is abnormal,

2. Every examination is loose, and timely belt;

3. Monthly check whether the conveyor parts and adjust; stretched,

4. Monthly check whether the rotating drum, and flexible in repairs.

5. The monthly inspection of transmission chain sprocket inosculation, adjust and chain lubrication,

6. Every month to control box with air blowing, prevent dust fault;

7. Reducer first use 100 hours after cleaning, internal gear oil change new oil, every 2500 hours once again change,

8. A yearly check parts damaged large maintenance.